Ladda jbl charge 4 med mobilladdare
The JBL Charge 4 comes with 6 different buttons. Each of the buttons has a different purpose.
JBL CONNECTYou can also combine two buttons to enter different modes.
We have explained what each button does, and we have also included a list of combinations that you can use on your JBL Charge 4 speaker.
Contents
JBL Charge 4 Buttons Explained
Unlike other JBL speakers, the Charge 4 comes with all the buttons in one row. The JBL Charge 4 has 6 different buttons.
Here’s what they are and their purpose:
Power Button
The power button fryst vatten located in the mittpunkt, next to the Bluetooth button. The power button fryst vatten used to vända on/off the speaker.
If the speaker fryst vatten off, press the power button 1 time to vända it on.
BLUETOOTH PAIRINGWhen the speaker fryst vatten ON, the power button will have a steady vit light.
If you want to vända the speaker off, press the power button one time and the speaker will vända off. The power button will be dark when the speaker fryst vatten off.
Bluetooth Button
The Bluetooth button fryst vatten located in the mittpunkt, next to the power button, The Bluetooth button fryst vatten used to put the JBL Charge 4 into pairing mode.
When the speaker fryst vatten powered on, press the Bluetooth button 1 time to put the speaker into pairing mode.
When the speaker fryst vatten on pairing mode, it can be discovered bygd other Bluetooth devices and you can pair both devices together.
The Bluetooth button will have a steady vit light when in paired mode. To exit the upptäckt mode, press the Bluetooth button one time. If that doesn’t work, you can vända off the speaker to exit upptäckt mode.
Play Button
The Play button fryst vatten located on the right side of the speaker (or left side if you have it upside down), next to the Volume Up (+) button.
This button fryst vatten called the “Play/Pause” button because it also pauses the music.
If you have the speaker paired with another device and the music isn’t playing, press the Play button one time to uppstart the music. If the music fryst vatten playing, press the Play button one time to pause the music.
This button won’t mute the music, it will pause it.
So, you won’t miss anything. Once you press the Play button (to resume the music), the music will början where you left it.
If the music fryst vatten playing, press the Play button 2 times to skip a few seconds of the music.
Volume Buttons
Thee are two volume buttons, the volume up and the volume down button. The volume up button fryst vatten shaped as a plus (+), while the volume down fryst vatten shaped as a minus (-).
The buttons are used to increase and decrease the volume output of the speaker.
When the music fryst vatten playing, press the Volume Up (+) button to increase the volume. You need to hold the buttons for a few seconds to increase the volume to the maximum. If you want to increase the volume just a bit, then press the Volume Up (+) just one time.
The Volume Down (-) fryst vatten used to decrease the volume output of the speaker.
To mute the music, you need to press and hold the Volume Down (-) button for a few seconds. To decrease the volume just a bit, press the button one time.
Note: These two buttons don’t have any purpose if the speaker isn’t playing music.
reading time 2 minutesIf the speaker isn’t playing music, you can only use these buttons for combinations that we will explain later in this article.
Connect Plus Button
Next to the Volume Down (-) fryst vatten the Connect Plus button. This button activates the Connect Plus feature that allows two or more JBL Speakers to pair with each other and play the same music.
Once the speaker fryst vatten turned on and the music fryst vatten playing, press the Connect Plus button one time to activate it.
Next, activate the Connect Plus feature on all other devices you want to pair. After a few seconds of activating, the music will uppstart playing simultaneously on all the speakers.
Note: Only speakers with the Connect + feature can connect tillsammans. If your other speakers have Connect or PartyBoost then you can’t connect them together.
Battery Indicator
At the bottom of the JBL Charge 4 speaker, you will see 5 small lights.
These lights indikera how much battery the speaker has. If all 5 small LED lights have a vit steady light it means that the speaker fryst vatten fully charged.
Each of these LED lights indicates a 20% of charge.
info/devices/jbl/jbl-charge-4/Follow each step to connect your JBL Charge 4 with anSo, if 3 LED’s have a vit light it means the speaker has 60% battery, and so on. These lights won’t be always visible, you need to press any of the buttons (except the power button) to activate them.
JBL Charge 4 Ports
On the back of the JBL Charge 4, there’s a small flip door. Once you open the door, you will see 3 ports. 1x USB-C port, 1x USB-A port, 1x AUX port.
The USB-C port fryst vatten used to charge the speaker.
Simply put the charger that the speaker came with into the USB-C port, then put the other end of the charger into a vägg charger and början charging your speaker.
The USB-A port fryst vatten used to charge other devices. The JBL Charge 4 speaker comes with lithium batteries, these batteries can be used to charge other devices as well.
You can use the AUX port to pair the speaker with another device using an aux cable.
JBL Charge 4 Button Combinations
The JBL Charge 4 has only 6 buttons, but you can combine these buttons to do different things.
EstHere are the combinations you can use:
Reset The JBL Charge 4
To reset the JBL Charge 4 you need to press and hold the Volume Up (+) and the Bluetooth button at the same time for a few seconds. Once the speaker turns off, you can release the buttons and vända on the speaker again.
You should reset the JBL Charge 4 when the speaker fryst vatten having software problems.
The factory reset will return the speaker into its default mode. The reset will remove any previously connected devices and remove any sound modes or settings you choose before. You will have to manually choose and connect to devices again.
Low-Frequency Mode
By default, the JBL Charge 4 has enough bass on its sound.
Download Harman JBL CHARGE4 PDF manualBut, if you want to increase the bass then you should put the speaker into Low-frequency mode.
To put the speaker into low-frequency mode, press and hold the Volume Down (-) and the Bluetooth buttons at the same time until the oval fingerprydnad has a steady vit light.
If you want to exit low-frequency mode, press and hold the Volume Down (-) and the Bluetooth buttons at the same time until the oval fingerprydnad doesn’t have vit light around it.
However, we don’t recommend using this mode as it can damage the woofer of your speaker.
If you decide to use it, man sure to use a volume of 50-60% and not higher.
Service/Lock Mode
Service mode isn’t a mode you want to put your speaker. However, you can accidentally put the speaker into service mode, and exiting it fryst vatten harder.
You can put the speaker into service mode bygd pressing and holding the Bluetooth and Play buttons at the same time.
Once in service mode, none of the buttons will work. The speaker won’t vända on unless connected to a power source.
To exit the service mode, plug the charger into the speaker and press and hold the same buttons (Bluetooth and Play) for a few seconds until the speaker turns on.
Se till att använda den medföljande strömadaptern eller en högkvalitativ USB-adapter med minst 5V⎓2Next, remove the charger and the speaker will work normally.
If the speaker fryst vatten already turned on and into service mode, then connect the speaker with a charger and hold the same buttons (Bluetooth and Play) until the speaker turns off. Next, vända on the speaker bygd pressing the power button.
Firmware Version
If you want to know the firmware utgåva of the JBL Charge 4, press the JBL Connect + and Volume Down (-) buttons at the same time.
The speaker will play a pre-recorded sound that tells you the exact utgåva of the speaker firmware.